- Taiki Arai (Oki, call-in) - Benjamin Gordon (Google, call-in) - Smith Kennedy (HP Inc, PWG Vice-Chair, call-in) - Jeremy Leber (Lexmark, PWG Chair, call-in) - Ira McDonald (High North, PWG Secretary, IPP WG Co-Chair, OP Chair, call-in) - Michael Rhines (Qualcomm, Mopria Liaison, call-in) - Anthony Suarez (Kyocera Document Solutions, call-in) - Mike Sweet (Lakeside Robotics, IPP WG Secretary, call-in) - Bill Wagner (TIC, former Cloud WG Chair, former WIMS WG Chair, call-in) - Uli Wehner (Ricoh, call-in) - Jimmy Wu (Microsoft, call-in) - Ray Xu (Google, call-in) - Steven Young (Canon, call-in)
This meeting was announced by Smith Kennedy and chaired by Jeremy Leber. This was a PWG Virtual F2F meeting with WebEx and Audio bridges. These minutes were prepared by Ira McDonald.
See slides at:
https://ftp.pwg.org/pub/pwg/general/Plenary/pwg-plenary-august-2022.pdf
* Reviewed agenda and PWG IP Policy -- Ira McDonald as minute taker -- All times are US Eastern Time (not Mountain Time) Tuesday 16 August 2022 10:00 AM – 10:45 AM PWG Plenary 10:45 AM – 11:00 AM IPP WG : Status 11:00 AM – 12:00 PM IPP WG : Prototype Ready Specifications 12:00 PM – 12:45 PM Break / Lunch 12:45 PM – 2:00 PM IPP WG : Evolution of IPP/2.0 and IPP Everywhere 2.0 Wednesday 17 August 2022 10:00 AM – 11:00 AM IPP WG : 3D Printing Liaisons – Status and Guidance 11:00 AM – 12:00 PM IPP WG : Evolution of OAuth and IPP – Part 1 12:00 PM – 12:45 PM Break / Lunch 12:45 PM – 1:45 PM IPP WG : Evolution of OAuth and IPP – Part 2 1:45 PM – 2:00 PM IPP WG : Next Steps Thursday, August 18 10:00 AM – 12:00 PM IDS WG : Status and Discussion – PWG HCD Security Guidelines v1.0 12:00 PM – 12:45 PM Break / Lunch 12:45 PM – 1:45 PM IPP WG : 3D Printing Extra Topics
* 2021-2023 Term -- PWG Chair: Jeremy Leber (Lexmark) -- PWG Vice-Chair: Smith Kennedy (HP Inc) -- PWG Secretary: Ira McDonald (High North)
* 30 members (29 voting, 1 non-voting)
* Thanks to all of you for contributing your time and efforts to the PWG!
* 2022 Meeting Schedule -- 15-17 November 2022 - Virtual F2F? * 2023 Meeting Schedule -- 7-9 February 2023 – Virtual F2F -- 16-18 May 2023 - Joint w/ OpenPrinting (TBD – Lexington?) -- 8-10 August 2023 – Virtual F2F? (TBD) -- 14-16 November 2023 – Virtual F2F? (TBD) * Contact chair@pwg.org if you are interested in hosting a PWG F2F event
* 878 Printers now certified! -- https://www.pwg.org/printers -- New printers from Digital Check, OKI, HP, Lexmark, and Samsung (via HP) -- More on the way! * IPP Everywhere™ Self Certification 1.1 Update 3 -- Released 17 May 2021; approved 16 June 2021 -- Mandatory for certification starting 1 July 2021 --- IPP Everywhere™ v1.0 Certifications no longer accepted (for new printers) * IPP Everywhere™ Self Certification 1.1 Update 4 -- New Beta now available * PWG IPP Everywhere Logo Policy update published 16 May 2022 -- Extends grace period for when it is acceptable for members to use the IPP Everywhere logo and name in their marketing collateral
* Process v4.0 - development nearing completion! -- Draft nearly ready for broader review -- Detailed content moved to separate PWG Policy documents to simplify update approval process --- PWG Document Management Policy --- PWG Meetings Policy --- PWG Workgroup Decisions Policy * PWG Policy Document Status -- PWG Communications Infrastructure : Draft in review -- PWG Roles and Responsibilities Policy : Draft in review -- PWG IPP Everywhere Logo Policy: 2022-05-16 -- PWG Officer Elections : 2021-04-21 -- PWG Antitrust Policy : 2021-02-01 -- PWG Press Release Review Policy: 2020-09-08 -- PWG Namespace Policy : 2020-07-20 -- PWG IPP Registry Policy : 2020-05-18
* PWG on GitHub -- https://github.com/istopwg * IPP Sample -- https://github.com/istopwg/ippsample * IPP Everywhere™ Self-Certification Tools -- https://github.com/istopwg/ippeveselfcert * IPP Registry -- https://github.com/istopwg/ippregistry * PWG Books: -- https://github.com/istopwg/pwg-books
*** IDS WG (Ira McDonald for Alan Sukert) - see Plenary slides
* Officers
-- IDS WG Chair: Alan Sukert (Independent)
-- IDS WG Vice-Chair: TBD
-- IDS WG Secretary: Alan Sukert (Independent)
-- IDS WG Document Editors: Ira McDonald (High North) – HCD Security Guidelines
* Current Charter
-- Updated to reflect development of Hardcopy Device (HCD) Security Guidelines by Ira and new
focus on Common Criteria HCD Protection Profiles (PPs), HCD Security Guidelines and Hardcopy
Device security standards
-- https://ftp.pwg.org/pub/pwg/ids/charter/ch-ids-charter-20190826.pdf
* Current Status
-- Focus the IDS WG on outreach with standards bodies involved in HCD security issues
--- Monitoring development of Hardcopy Device collaborative PP (cPP) / Supporting Document (SD)
--- Looking at initiating interface with other standards efforts related to hardcopy devices
-- IDS Meetings
--- IDS Meetings held on 05/26/22, 06/16/22, 07/14/22, 07/28/22, 08/11/22
--- Next IDS call scheduled for 09/08/22
-- HCD international Technical Committee (iTC) Meetings
--- HCD iTC holds weekly HCD iTC Meetings
--- Goal now is to develop, review, and publish an HCD cPP/SD v1.0 in early 4Q 2022
--- Will discuss the results of the weekly HCD iTC Meetings held since last IDS F2F in
May 2022 and the current HCD cPP/SD v1.0 status at the IDS F2F Session on Thursday
18 August 2022
-- Developing HCD Security Guidelines to provide guidance on current HCD security
technology and security issues
--- Will review the latest status at the IDS F2F session
-- IDS F2F Session will have a special topic updating the discussion of the May 2021
Cybersecurity Executive Order from the August 2021 IDS F2F Session
-- Finally, IDS F2F Session will review current status of HCD-related standards efforts
of the Trusted Computing Group (TCG) and Internet Engineering Task Force (IETF)
* Next steps
-- Next IDS call scheduled for Thursday 09/08/22 at 3pm US Eastern
*** IPP WG (Ira McDonald, Mike Sweet) - see Plenary slides
* Officers -- IPP WG Co-Chair: Ira McDonald (High North) -- IPP WG Co-Chair: Paul Tykodi (TCS) -- IPP WG Secretary: Michael Sweet (Lakeside Robotics) -- IPP WG Editors: Smith Kennedy (HP) and Michael Sweet (Lakeside Robotics) * Current Charter -- Updated to reflect current and future work items -- https://ftp.pwg.org/pub/pwg/ipp/charter/ch-ipp-charter-20210409.pdf -- IPP WG is chartered with: --- Development of IPP --- Maintenance of IPP and the IETF IPP registries --- Support for new clients and network architectures (Cloud, SDN) --- Support for new MFD/Imaging service bindings and emerging technologies such as 3D Printing --- Maintenance of various IETF and PWG SNMP MIBs --- Maintenance of the PWG Semantic Model * Specifications in development -- Internet Printing Protocol/2.x Fourth Edition - Interim -- IPP Driverless Printing Extensions v2.0 - Prototype -- IPP Encrypted Jobs and Documents v1.0 - Prototype -- IPP Enterprise Printing Extensions v2.0 - Prototype -- IPP Everywhere™ v2.0 - Interim -- IPP Production Printing Extensions v2.0 - Stable * Up-to-date pending IANA registrations online -- http://www.pwg.org/ipp/ipp-registrations.xml -- Continue to maintain this in parallel for new specifications -- Github repository: https://github.com/istopwg/ippregistry * Next steps -- Next IPP conference calls on Thursday 09/01/22 and 09/15/22 at 3pm US Eastern
* OpenPrintingGoogle Summer of Code 2022 (Aveek/Till) -- https://developers.google.com/open-source/gsoc/timeline -- Aveek/Till are the coordinators for all Linux Foundation projects -- Coding started 13 June 2022 and ends 12 September 2022 * OpenPrinting CUPS (Zdenek Dohnal, RedHat) -- https://openprinting.github.io/cups-2.4.2/ -- Current stable release is OP CUPS v2.4.2 on 26 May 2022. * OpenPrinting CUPS Filters (Till) -- https://github.com/OpenPrinting/cups-filters/releases/tag/1.28.15 -- Current release is OP CUPS Filters v1.28.15 on 11 April 2022. * OpenPrinting PAPPL (Printer Application) (Mike) -- https://github.com/michaelrsweet/pappl/releases/tag/v1.2.1 -- Current release is PAPPL v1.2.1 on 26 May 2022. * OpenPrinting LPrint Label Printer Application (Mike) -- https://github.com/michaelrsweet/lprint/releases/tag/v1.1.0 -- Current release is LPrint v1.1.0 on 23 December 2021 * OpenPrinting PostScript, Ghostscript, Gutenprint, HPLIP Printer Apps (Till) -- https://github.com/OpenPrinting/ps-printer-app -- https://github.com/OpenPrinting/ghostscript-printer-app -- https://github.com/OpenPrinting/gutenprint-printer-app -- https://github.com/OpenPrinting/hplip-printer-app * OpenPrinting CUPS Legacy Driver Retro-Fitting Printer Applications (Till) -- https://github.com/OpenPrinting/pappl-retrofit
*** Mopria (Smith Kennedy) - see Plenary slides
* Mopria liaison to PWG : Michael Rhines (Qualcomm) * Liaison agreement addendum signed 10 May 2022 -- Renews liaison agreement and auto-renews it until one or both parties cancel it * No collaboration currently active but opportunities exist
*** 3D / Additive Manufacturing (Paul Tykodi) - see Plenary slides
* America Makes & ANSI Additive Manufacturing Standardization Collaborative (AMSC)
-- https://www.ansi.org/standards-coordination/collaborativesactivities/
additive-manufacturing-collaborative
-- IEEE-ISTO Printer Working Group is participating in the AMSC initiative
* ASTM Committee F42 on Additive Manufacturing Technologies
-- https://www.astm.org/COMMITTEE/F42.htm
* INCITS Digital Manufacturing Technical Committee
-- https://www.incits.org/committees/digitalmanufacturing
-- Liaison allows PWG to monitor activities of ISO/IEC JTC 1 WG12 3D Printing and Scanning
* 3MF Consortium
-- https://www.3mf.io
* American Concrete Institute Committee 564 - 3-D Printing with Cementitious Materials
-- https://www.concrete.org/committees/directoryofcommittees/acommitteehome.aspx?
committee_code=C0056400
--- Paul Tykodi is investigating the possibility that the IEEE-ISTO Printer Working Group
may be invited to deliver a webinar on its Safe G-Code best practice document to ACI 564
committee members in the summer of 2022
* 3D PDF at the PDF Association
-- https://www.pdfa.org/3d-pdf-at-the-pdf-association/
--- Paul Tykodi is representing the IEEE-ISTO Printer Working Group in the activities of the
PDF Association 3D PDF Technical Working Group (TWG) and as time permits the 3D PDF User
Liaison Working Group (LWG) as well
--- Participation in the work of the PDF Association allows the PWG to monitor the activities
of ISO TC171 SC2 - Document file formats, EDMS systems and authenticity of information
https://www.iso.org/committee/53674.html, which is the committee responsible for PDF file
format standardization
* VDMA OPC UA for Additive Manufacturing – Joint Working Group 40 540
-- https://www.vdma.org/events-trade-fairs/-/event/view/70649
--- Paul Tykodi is representing the IEEE-ISTO Printer Working Group in the activities of the
Joint Working Group. The JWG has a potential interest in referencing IPP 3D standard for
secure remote job submission