- Smith Kennedy (HP Inc, PWG Chair, call-in) - Jeremy Leber (Lexmark, call-in) - Ira McDonald (High North, PWG Secretary, IPP WG Co-Chair, call-in) - Jeremy Reitz (Xerox, SM WG Chair, call-in) - Alan Sukert (Xerox, PWG Vice-Chair, call-in) - Mike Sweet (Apple, IPP WG Secretary, call-in) - Paul Tykodi (TCS, IPP WG Co-Chair, call-in) - Bill Wagner (TIC, SM WG Secretary, call-in) - Craig Whittle (Sharp, call-in) - Rick Yardumian (Canon, call-in)
This meeting was announced and chaired by Smith Kennedy. The meeting was a Virtual F2F on WebEx and Audio bridges. These minutes were prepared by Ira McDonald.
See slides at:
http://ftp.pwg.org/pub/pwg/general/Plenary/pwg-plenary-november-2016.pdf
- Reviewed agenda and PWG IP Policy
-- Ira McDonald as minute taker
Monday, November 14, US Mountain Time
9:00 AM - 10:15 AM PWG Plenary
10:15 AM - 10:30 AM Break
10:30 AM - 12:30 PM IDS WG : HCD Protection Profile and certification issues
discussion
12:30 PM - 1:30 PM Lunch
1:30 PM - 3:00 PM IPP WG : Status · Finishings 2.1
3:00 PM - 3:15 PM Break
3:15 PM - 5:00 PM IPP WG : IPP Everywhere Self Certification · IPP 3D Printing
Tuesday, November 15, US Mountain Time
9:00 AM - 12:00 PM SM WG : Status · Semantic Model 3 · 3D Printing Ext · 3D PJT
12:00 PM - 1:00 PM Lunch
1:00 PM - 4:00 PM IPP WG : System Service · Next Steps
- Note - TCG Members Meeting February 6-10 2017 (San Diego, CA) - Proposed Dates/Locations -- February 14-15 : Sunnyvale, CA – Hosted by Apple Inc. -- April 25-27 : Palo Alto, CA – Hosted by HP Inc. (Joint PWG/ OpenPrinting) -- August 8-9 : TBD -- November 14-15 : TBD - Discussion - April Joint PWG/OP host? -- HP could possibly host in Palo Alto or San Diego -- Ricoh could be queried to host in Cupertino -- Qualcomm could be queried to host in San Diego - August F2F -- Jeremy Leber - to check if Lexmark could host - November F2F -- Ira - suggest we permanently change October/November to Virtual F2F
- Discussion -- Qualcomm has purchased CSR -- Sharp Labs has renewed for 2017 -- YSoft (Czech Republic) joining for 2017
- PWG Chair: Smith Kennedy (HP Inc) - PWG Vice-Chair: Alan Sukert (Xerox) - PWG Secretary: Ira McDonald (High North)
* Github organization account -- https://github.com/istopwg * Web site repository -- https://github.com/istopwg/website * Semantic Model Repository -- https://github.com/istopwg/pwg-semantic-model * IPP Everywhere Self Certification Tools -- https://github.com/istopwg/ippeveselfcert * IPP Registry -- https://github.com/istopwg/ippregistry
* Purpose -- To provide newcomers to the PWG and the PWG members and officers themselves with simple, high-level definitions of the set of tenets and design principles held by the PWG that guide the design and creation of its technologies * Content -- Value of late binding (best fidelity in Cloud servers, enables job redirection) -- Intent vs. process for output fidelity -- Value of separating job ticket / job information from document content -- IPP design patterns?
* Original notion: Update existing Process 3.0 to merge in subsequently published PWG process documents (more than a dozen) * Revised notion: Refactor the Process document to describe the processes of the PWG to make them simple and obvious to the uninitiated reader (keep existing separate policy documents for freshness and timely updates) - Discussion -- Proposing new work to the PWG -- Approving new work and assigning to a PWG work group -- PWG approval for various document types --- whitepaper --- standard --- etc. -- Proposal to make code, ABNF, schema into formal PWG documents --- Consensus - add to PWG Process 4.0 * PWG Process 4.0 updates by PWG SC tiger team (alternate weeks from SC) -- First call Thursday 17 November 2016 9am Pacific / 12pm Eastern
- Active IETF IPP specs - both now APPROVED by IETF for publication -- IETF IPP/1.1: Encoding and Transport (obsoletes RFC 2910/3382) -- IETF IPP/1.1: Model and Semantics (obsoletes RFC 2911/3381/3382) - Active PWG IPP specs -- IPP 3D Printing Extensions (3D) - PWG Last Call (11/11/16) -- IPP Finishings 2.1 (FIN) - Stable draft - PWG Last Call (11/11/16) -- IPP System Control Service (SYSTEM) - Interim draft - Recent Full Standard -- PWG 5100.12-2015: IPP 2.0, 2.1, and 2.2 - PWG Standard - Recent Candidate Standards -- PWG 5100.20-2016: IPP Everywhere Printer Self-Certification Manual v1.0 (SELFCERT) -- PWG 5100.19-2015: IPP Implementor's Guide v2.0 (IG) -- PWG 5100.18-2015: IPP Shared Infrastructure Extensions (INFRA) - Recent IETF RFCs -- RFC 7612: LDAP Schema for Printer Services -- RFC 7472: IPP over HTTPS Transport Binding and “ipps” URI Scheme - Up-to-date pending IANA registrations online -- http://www.pwg.org/ipp/ipp-registrations.xml -- https://github.com/istopwg/ippregistry - IPP Everywhere Printer Self-Certifications -- https://www.pwg.org/ippeveselfcert (submission page) -- https://www.pwg.org/printers (printer listing page) --- 19 printers currently listed - IPP Sample Code -- https://github.com/istopwg/ippsample -- Fork of CUPS code includes ippfind, ippproxy, ippserver, and ipptool -- Could be used for IPP System Service prototyping - Next steps -- IPP WG call on Wednesday 30 November at 1pm US Eastern - IPP System Service -- IPP WG call on Wednesday 14 December at 1pm US Eastern - PWG LC review
*** Semantic Model WG - see Plenary slides
- Active SM WG specs -- Mapping CIP4 JDF to PJT 1.0 (JDFMAP) - Prototype draft (June 2015) --- Complete content, JDF job ticket examples available, awaiting prototype -- Update and Finalization of Semantic Model 2 --- Produce an updated version of SM2, reflecting corrections and reasonable additions from IPP, but no Cloud or 3D aspects -- Creation of Semantic Model 3 --- Start afresh with SM3 to reflect updated view of MFD, with addition of Cloud aspects and 3D Print and Scan Services -- New 3D Print efforts --- New 3D Print efforts following the IPP project are within the scope of chartered projects, but will be identified in an SM charter update --- see 3D Print Job Ticket discussion on Plenary slides 28 and 29 - Next steps -- SM WG call on Wednesday 7 December 2016 at 1pm US Eastern
*** IDS WG - see Plenary slides
- Original IDS Charter
-- Investigate and define standards for addressing general
security attributes for imaging devices and services
-- Provide a path for vendors to review and contribute to
the definition of Common Criteria HCD Protection Profiles
- IDS Status
-- IDS WG is in "hibernation" - to be revived as needed
--- IDS documents have either been approved by PWG or
archived for work by other PWG Working Groups in future
- Common Criteria HCD Protection Profiles
-- MFP Technical Committee Meetings on Nov 1 & 3, 2016
--- Discussion of how interpretations and resolution of HCD PP
issues will be coordinated between US and Japanese Schemes
--- Discussion of issues/questions found in implementing HCD PP
-- Discussing outcomes from these MFP Technical Committee
Meetings during this PWG Face to Face Meeting so we can
determine next steps
- Next TCG Members Meetings (face-to-face) -- TCG Members Meeting February 6-10 2017 - San Diego, CA - Ira to call in -- TCG Members Meeting 12-16 June 2016 – Hamburg, Germany – Ira to call in - Trusted Mobility Solutions (TMS) -- Scope: enterprise, medical, banking, virtualization, mobile mgmt -- Formal liaisons: ETSI (NFV), Open Mobile Alliance (device mgmt), Global Platform (TEE protected environment), Mobey Forum (banking/payments, biometrics authentication, integrity) -- Informal liaisons: 3GPP (integrity), ITU-T (integrity), Small Cell Forum (integrity) - Mobile Platform (MPWG) -- Scope: mobile phones, PDAs, eBook readers, etc. -- Formal liaisons - Global Platform (TEE), Mobey Forum (banking) -- Multiple Stakeholder Model – TCG published May 2016 --- http://www.trustedcomputinggroup.org/multiple-stakeholder-model-v3r40- mobile/ - TCG Public Review Specifications -- http://www.trustedcomputinggroup.org/resources/specifications_in_ public_review -- TCG TPM 2.0 Library rev1.36 – ends 11/15/16 -- TCG TPM 2.0 FIPS-140 Guidance v1rev0.8 – ended 09/26/16 -- TCG Guidance for Securing Resource-Constrained Devices v1r17 – ends 09/12/17
*** Gartner Report on the Future Need for 3D Printing Workflow Software Products
- "Pete Basiliere is Research Vice President - Imaging and Print Services. Mr. Basiliere provides research-based insights on 3D printing, digital printing systems and software applications, customer communications management (CCM), strategic document outsourcing (SDO) and automated document factory (ADF) best practices, go-tomarket strategies, and technology trends." - Gartner web site - New Article Published in August 2016 – “Innovation Insight for 3D Print Workflow Software” –- https://www.gartner.com/doc/3407830 - Gartner / PWG Meeting (TBD) - Pete Basiliere has agreed to remotely attend either a future IPP WG teleconference or a special PWG meeting to further discuss 3D printing topics